Titanium 45 Degree Elbow
Titanium 45 degree elbows are a type of pipe fitting that is designed to connect two pipes or tubes at a 45-degree angle. The elbows typically have a female end on one side and a male end on the other side, allowing it to be easily screwed onto the ends of the pipes or tubes. The 45-degree angle helps to redirect the flow of fluid or gas through the piping system, making it ideal for use in applications where space is limited or where a specific angle is required. It has a smooth inner surface that ensures optimal flow of fluids without causing any turbulence in the flow. The design of the elbow allows it to be easily installed and maintained while providing superior durability and longevity.
ASME B16.9 45° Titanium Elbow

JIS B2312 45° Titanium Elbow

Dimensions Of 45° Titanium Elbow We Offer

| Nominal Pipe Size
(DN) |
Outside
Diameter Bevel (D) |
Wall Thickness
(t) |
Center to End
(B) |
|||
| Sch.5S | Sch.10S | Sch.40S | Sch.80S | |||
| 1/2 | 21.3 | 1.7 | 2.1 | 2.8 | 3.7 | 15.9 |
| 3/4 | 26.7 | 1.7 | 2.1 | 2.9 | 3.9 | 19.1 |
| 1 | 33.4 | 1.7 | 2.8 | 3.4 | 4.5 | 22.2 |
| 1-1/4 | 42.2 | 1.7 | 2.8 | 3.6 | 4.9 | 25.4 |
| 1-1/2 | 48.3 | 1.7 | 2.8 | 3.7 | 5.0 | 28.4 |
| 2 | 60.3 | 2.1 | 2.8 | 3.9 | 5.5 | 35.1 |
| 2-1/2 | 70.3 | 2.1 | 3.0 | 5.2 | 7.0 | 44.5 |
| 3 | 88.9 | 2.1 | 3.0 | 5.5 | 7.6 | 50.8 |
| 3-1/2 | 101.6 | 2.1 | 3.0 | 5.7 | 8.0 | 57.2 |
| 4 | 114.3 | 2.1 | 3.0 | 6.0 | 8.6 | 63.5 |
| 5 | 141.3 | 2.8 | 3.4 | 6.6 | 9.5 | 79.2 |
| 6 | 168.3 | 2.8 | 3.4 | 7.1 | 11.0 | 95.3 |
| 8 | 219.1 | 2.8 | 3.8 | 8.2 | 12.7 | 127.0 |
| 10 | 273.1 | 3.4 | 4.2 | 9.3 | 12.7 | 158.8 |
| 12 | 323.9 | 4.0 | 4.6 | 9.5 | 12.7 | 190.5 |
| Nominal Pipe Size
(DN) |
Outside
Diameter Bevel (D) |
Wall Thickness
(t) |
Center to End
(B) |
|||
| Sch.10S | Sch.20S | Std | XS | |||
| 14 | 355.6 | 4.8 | 7.9 | 9.5 | 12.7 | 222.3 |
| 16 | 406.4 | 4.8 | 7.9 | 9.5 | 12.7 | 254.0 |
| 18 | 457.2 | 4.8 | 7.9 | 9.5 | 12.7 | 285.8 |
| 20 | 508.0 | 5.6 | 9.5 | 9.5 | 12.7 | 317.5 |
| 22 | 558.8 | 5.6 | 9.5 | 9.5 | 12.7 | 342.9 |
| 24 | 609.6 | 6.4 | 9.5 | 9.5 | 12.7 | 381.0 |
| 26 | 660.4 | 7.9 | 12.7 | 9.5 | 12.7 | 406.4 |
| 28 | 711.2 | 7.9 | 12.7 | 9.5 | 12.7 | 438.2 |
| 30 | 762.0 | 7.9 | 12.7 | 9.5 | 12.7 | 469.9 |
| 32 | 812.8 | 7.9 | 12.7 | 9.5 | 12.7 | 501.7 |
| 34 | 863.6 | 7.9 | 12.7 | 9.5 | 12.7 | 533.4 |
| 36 | 914.4 | 7.9 | 12.7 | 9.5 | 12.7 | 565.2 |
| 38 | 965.2 | 7.9 | 9.5 | 12.7 | 599.9 | |
| 40 | 1016.0 | 7.9 | 9.5 | 12.7 | 632.0 | |
| 42 | 1066.8 | 660.4 | ||||
| 44 | 1117.6 | 695.5 | ||||
| 46 | 1168.4 | 726.9 | ||||
| 48 | 1219.2 | 758.9 | ||||
Chemical Composition Of Titanium Grades
| Grade | Nominal chemical composition | Main ingredients(%) | Impurities, not greater than(%) | |||||||
| Ti | Other main ingredients | Fe | C | N | H | O | Other elements | |||
| Single | Total | |||||||||
| GR1 | Industrial pure titanium | Allowance | 0.20 | 0.08 | 0.03 | 0.015 | 0.18 | 0.10 | 0.40 | |
| GR2 | Industrial pure titanium | Allowance | 0.30 | 0.08 | 0.03 | 0.015 | 0.25 | 0.10 | 0.40 | |
| GR3 | Industrial pure titanium | Allowance | 0.30 | 0.08 | 0.05 | 0.015 | 0.35 | 0.10 | 0.40 | |
| GR4 | Industrial pure titanium | Allowance | 0.50 | 0.08 | 0.05 | 0.015 | 0.40 | 0.10 | 0.40 | |
| GR5 | Ti-6Al-4V | Allowance | Al:5.5~6.75
V:3.5~4.5 |
0.30 | 0.08 | 0.05 | 0.015 | 0.20 | 0.10 | 0.40 |
| GR6 | Ti-5Al-2.5Sn | Allowance | Al:4.0~6.0
Sn:2.0~3.0 |
0.50 | 0.08 | 0.05 | 0.015 | 0.20 | 0.10 | 0.40 |
| GR7
GR11 |
Ti-0.2Pd | Allowance | Pd:0.12~0.25 | 0.30 | 0.08 | 0.03 | 0.015 | 0.25 | 0.10 | 0.40 |
| GR9 | Ti-3Al-2.5V | Allowance | Al:2.0~3.5
V:1.5~3.0 |
0.25 | 0.08 | 0.05 | 0.015 | 0.12 | 0.10 | 0.30 |
| GR12 | Ti-0.3Mo-0.8Ni | Allowance | Mo:0.2~0.4
Ni:0.6~0.9 |
0.30 | 0.08 | 0.03 | 0.015 | 0.25 | 0.10 | 0.40 |
| GR16
GR17 |
Ti-0.05Pd | Allowance | Pd:0.04~0.08 | 0.30 | 0.08 | 0.03 | 0.015 | 0.25 | 0.10 | 0.40 |
| GR18 | Ti-3Al-2.5V-0.05Pd | Allowance | Al:2.5~3.5
V:2.0~3.0 Pd:0.04~0.08 |
0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 0.10 | 0.40 |
| GR19
GR20 |
Ti-3Al-8V-6Cr-
4Mo-4Zr |
Allowance | Al:3.0~4.0
V:7.5~8.5 Cr:5.5~6.5 Mo:3.5~4.5 Zr:3.5~4.5 Pd:≤0.10 |
0.30 | 0.05 | 0.03 | 0.030 | 0.14 | 0.10 | 0.40 |
| GR21 | Ti-15Mo-3Al-
2.7Nb-0.25Si |
Allowance | Mo:14.0~16.0
Al:2.5~3.5 Nb:2.4~3.2 Si:0.15~0.25 |
0.40 | 0.05 | 0.05 | 0.015 | 0.17 | 0.10 | 0.40 |
| GR24 | Ti-6Al-4V-0.05Pd | Allowance | Al:5.5~6.75
V:3.5~4.5 Pd:0.04~0.08 |
0.40 | 0.08 | 0.05 | 0.015 | 0.20 | 0.10 | 0.40 |
| GR26
GR27 |
Ti-3Al-2.5V-0.1Ru | Allowance | Al:2.5~3.5
V:2.0~3.0 Ru:0.08~0.14 |
0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 0.10 | 0.40 |
| GR29 | Ti-6Al-4V-0.1Ru | Allowance | Al:5.5~6.75
V:3.5~4.5 Ru:0.08~0.14 |
0.25 | 0.08 | 0.05 | 0.015 | 0.13 | 0.10 | 0.40 |
Mechanical Properties Of Titanium Grades
| Grade | Mechanical properties at room temperature, not less than | |||
| Tensile strength
Rm/Mpa |
Elongation strength
Rp0.2/Mpa |
Section elongation
A/% |
Section shrinkage
Z/% |
|
| GR1 | 240 | 170 | 24 | 30 |
| GR2 | 345 | 275 | 20 | 30 |
| GR3 | 450 | 380 | 18 | 30 |
| GR4 | 550 | 483 | 15 | 25 |
| GR5 | 895 | 825 | 10 | 25 |
| GR6 | 785 | 680 | 10 | 25 |
| GR7
GR11 |
345 | 275 | 20 | 25 |
| GR9 | 620 | 483 | 15 | |
| GR12 | 483 | 345 | 18 | 25 |
Do you want to know more about our products?

Contact Me Wechat WhatsApp
Susan│Sales Manager
E-mail: susan@qinghangmetal.com
Phone: 0086 157 6917 2610(WhatsApp/Wechat)
